compressors, turbines (like steam turbines), piping, some of which heat-resistant (500C), container for liquid carbon dioxide, lots of plastic for the bubble, something for thermal storage, dry and clean carbon dioxide, these aren’t unusual or restricted resources, don’t depend on critical raw materials or anything like that

Compressed air without heat recovery is more like 30%, so this is huge

Carbon dioxide can be liquefied relatively easily which is what i guess makes this efficient

https://ic.unicamp.br/~stolfi/bitcoin/2020-12-31-bitcoin-ponzi.html

https://www.ic.unicamp.br/~stolfi/bitcoin/2021-01-16-yes-ponzi.html

i can only watch in disbelief

wood, magnesium, aluminum, plastics, they say titanium is bad, but i’d expect iron, nickel, manganese, tungsten, silver, maybe zinc to be worse

can you get methadone substitution therapy under these laws?

the death penalty for anything approach? yeah nah that would be war on drugs dialed to 11 and it sucked

at least he didn’t say he “fell on it” and it was totally an accident

CS and advanced statistics is what lots of applied math is anyway

does DSP count as maths, because there’s plenty of that in radar design. or any other sensor with some double-use potential for that matter

in this economy?

it can be bought in italy as a cleaning agent without going through entire process as for reagents purchase iirc

apparently ww1 era british soldiers figured out that cordite works like amyl but shittier (more specifically, nitroglycerin part) https://pdfs.semanticscholar.org/abaf/009c8713aadd8accbb03b2b40a93b5c3c77a.pdf

smokeless powder is, sort of https://en.wikipedia.org/wiki/Nitroglycerin#Industrial_exposure

you want something to help you in warehouse work? we have a tool for that: it’s called forklift

Hello I would like a mechanical slave

they have played us for absolute fools

it’s hacky and wrong. or you could use different hardware, maybe from competition, because result isn’t worth electricity it used

gpus as used for genai aren’t really suitable for normal loads like aerodynamic simulations, genai uses low precision data like fp8, fp4, blackwells and such are optimized for it so hard that you can’t really do anything else on this thing

🌏👨‍🚀🔫👨‍🚀 (currently since 2023)

nah. loam is, for example, 40% sand, 20% clay, 40% silt and it’s close to middle of that polygon, on top of letter O

for example, draw a line from 50% sand point on edge to 50% clay point on edge, the first one is 50% sand 50% silt because that axis for sand is also 0% for clay, the second one is 50% sand 50% clay because it lies at the line that is 0% silt

oh you “did your own research”. i work in pharma and there’s plenty of real problems to be solved instead of chasing wishes of dead chinese emperors